Gadsden Industrial Park http://www.gadsdenindustrialpark.com Offering Heavy Industrial Space with Cranes, Rail Car Storage, Rail Service and Transloading Services Thu, 21 Mar 2013 12:51:21 +0000 en-US hourly 1 54″ Wide (1370 mm) Hot Strip Mill http://www.gadsdenindustrialpark.com/items/hot-strip-mill.html http://www.gadsdenindustrialpark.com/items/hot-strip-mill.html#comments Thu, 03 Dec 2009 14:49:18 +0000 kurt http://www.gadsdenindustrialpark.com/?p=701 54” WIDE UNITED/MESTA HOT STRIP MILL

AGE: 1957
UPGRADES: 1978, 1988 &1996 – HAGC ADDED TO FINISHING MILLS
MILL CONTROLS UPGRADED

CAPACITY: 900,000 TONS PER YEAR

TYPE: SEMI-CONTINUOUS

INPUT SLAB: 25” MIN TO 50” MAX WIDTH (635 TO 1270 MM)
6” MIN TO 8.5” MAX THICK (152 TO 216MM)
8’ MIN TO 18’ MAX LENGTH (2.14 TO 5.18 M)

COIL SIZE: 22” TO 49-3/4” WIDE (559/1263 MM)
27.5” I.D. (700 MM)
0.06 TO 0.30” GAUGE (1.5 TO 7.6 MM)
80” O.D. (2030 MM)
22,000 LB. CAPACITY

SPEED: 1965 FPM (600 M/MIN)

MECHANICAL EQUIPMENT:

• (2) RUST 100 TPH PUSHER-TYPE REHEAT FURNACES
• (1) VERTICAL EDGER
• (1) UNIVERSAL REVERSING ROUGHING STAND
• COIL BOX
• FLYING CROP SHEAR
• (6) FINISHING STANDS
• COIL CONVEYOR
• DOWNCOILER

INDIVIDUAL EQUIPMENT DESCRIPTIONS

SCALEBREAKING: (1) 2-HIGH MECHANICAL TYPE CONVERTED TO HIGH PRESSURE SPRAY SYSTEM WITH 3 PUMPS

VERTICAL EDGER: 34” X 17” FACE (863 X 431 MM)
(2) 275 HP DRIVE MOTORS

ROUGHING MILL: 39” AND 54” X 58” (990 & 1371 X 1473 MM) 4-HIGH REVERSING, SINGLE STAND
TWO 5000 HP MOTORS – DIRECT DRIVE
40/100 RPM
700 VOLTS DC

FINISHING MILL: 4-HIGH STAND, SIX STAND UNITED
WORK ROLL: 25” DIA X 56” FACE (635 X 1422 MM)
BACKUP ROLL: 49” DIA X 56” FACE (1245 X 1422 MM)

STAND #1 DRIVE: 3500 HP DC MOTOR
150/300 RPM
4.26:1 GEAR REDUCER AND PINION STAND

STAND #2 DRIVE: 5000 HP DC MOTOR
150/300 RPM
3.17:1 GEAR REDUCER AND PINION STAND

STAND #3 DRIVE: 5000 HP DC MOTOR
150/300 RPM
1.9:1 GEAR REDUCER AND PINION STAND

STAND #4 DRIVE: 5000 HP DC MOTOR
150/300 RPM
WITH PINION STAND

STAND #5 DRIVE: 3500 HP DC MOTOR
135/270 RPM
WITH PINION STAND

STAND #6 DRIVE: 3500 HP DC MOTOR
150/300 RPM
WITH PINION STAND

RUNOUT TABLE: 324’

DOWNCOILER: SINGLE EXPANDABLE MANDREL
(2) WRAPPER ROLL DESIGN 500 PIW
12 TONS APPROX.
275 HP DC MOTOR

FEATURES:
• HYDRAULIC AUTOMATIC GAUGE CONTROL
• (6) FINISHING STANDS
• HYDRAULIC WORK ROLL BENDING (6) FINISHING STANDS
• (2) HYDRAULIC LOOPERS BETWEEN F4/F5 & F5/F6
• MILL AUTOMATION SYSTEM – LEVEL II

104308-000-00 (GP0021A)

]]> http://www.gadsdenindustrialpark.com/items/hot-strip-mill.html/feed 0 54″ Four High Temper Mill Stand http://www.gadsdenindustrialpark.com/items/54-four-high-temper-mill.html http://www.gadsdenindustrialpark.com/items/54-four-high-temper-mill.html#comments Wed, 09 May 2007 13:44:55 +0000 adminzz http://wp/2007/05/09/54-four-high-temper-mill.html 54″ BLISS NON-REVERSING TEMPER COLD MILL STAND
MANUFACTURER: E.W. BLISS CO.
AGE: 1955
UPGRADE: 1998
GENERAL SPECIFICATIONS
TYPE: NON-REVERSING
4-HIGH
SINGLE STAND

COIL START SIZE:

18/48″ WIDE (457 / 1219 MM)
.012 TO .125 GAUGE (.0301 / 3.175 MM)

COIL FINISH SIZE:

18/48″ WIDE (457 / 1219 MM)

SPEED: 3000 FPM (915 M/MIN)

POST SIZE 27″ x 30-3/4″ (830.25 sq inches)
WORK ROLLS: 21″ DIA X 54″ WIDE (533 X 1371 MM)
BACK-UP ROLLS: 53″DIA X 54″ WIDE (1346 X 1371 MM)
MAIN DRIVE: 1000 HP D.C. MOTOR
275 / 550 RPM MFG 1990
WITH PINION STAND

FEATURES:

HYD. BACKUP ROLL CHANGER
SPARE WORK ROLL/BACKUP ROLLS
SPARE ROLL CHOCKS

108400-000-00

]]> http://www.gadsdenindustrialpark.com/items/54-four-high-temper-mill.html/feed 0